Printing Innovation iCUBE 1 User Manual

-56-
NOTE: Do not wipe the starwheels as they may release and fall out. Do not clean the
printhead nozzle plate at this time; it will be cleaned during another task.
5. Use a clean, dry lint-free cloth to dry the inside of the unit. Avoid the grit rollers
since they can snag on the cloth and create debris.
Picture of the Wipe Lower Surfaces
Grit
Rollers
Platen
Housing
Picture of the
Wipe Upper Surfaces
Starwheels
Pinch Rollers

Printing Innovation iCUBE 1 Specifications

General

Brand	Printing Innovation
Model	iCUBE 1
Category	Label Maker
Language	English