Printing Innovation iCUBE 1 User Manual

-42-
3.7.1.2. Media Tab
Printing Adjustments: Allows
you to make minor
positioning changes to the
print area in relation to the
media if needed.
NOTE: Only works on jobs
using less than the full print
area (less than 8.5" wide).
Media Layout:
It’s possible to set what kind of
print jobs will arrive.
Inter-Label Gap: the media has
labels form
Blackmark: the media has
blacmark ont he DOWNSIDE
CUTSheet: cut after the
medium size
Continous: in this mode the
machine will print fluently
Use printer setting: the engine
has some setting what can
check with the nvm_getset command. For more information about please see under the engine
documentation.
My Print Settings: Access your custom print settings for various jobs that you uploaded through
the “Media Profile Upload” in the Toolbox.
Field
Values
Position Adjusment
• Horizontal Offset
• Vertical Offset
(offset units)
• Inches
• Millimeters
• Pixels
Media Layout
• Inter-Label Gap
• Black Mark
• Cut Sheet
• Continuous
• Use Printer Setting
Page Cutting
• Job Cut (cut at end of job
• Sheet per cut (number of pages before
cutting)
• Use Printer Settings
My Print Settings
• Defaults

Printing Innovation iCUBE 1 Specifications

General

Brand	Printing Innovation
Model	iCUBE 1
Category	Label Maker
Language	English