Printing Innovation iCUBE 1 User Manual

-5-
Ink tank latch/Ink Bay inspection
Cutter ispection
5.2.5. As Needed Maintenance Tasks 70
Printhead Cartridge cleaning (Manual Wipe while installed)
Printhead Cartridge cleaning (Remove Cartridge)
Waste Ink Absorber replacement
6. Troubleshooting 82
6.1. Maintenance Module Troubleshooting 82
6.2. Printhead Troubleshooting 83
6.3. Print Quality Troubleshooting 83
6.4. iCUBE Troubleshouting guide 84
 General 84
 Checklist before doing any support 84
 Troubleshouting Tools 85
 Dead engine,EWS,Firmware 86
 Print engine error messsage 86
 Crit 63-03-phead offline cancel page 87
 CARTRIDGE_MISSING 87
 DATA_PATH_UNDERRUN 87
 Fatal 7102 offline cancel page 88
 MAINTENANCE_BUSY 90
 PAPERPATH_CUTTER_ERRROR 91
 PAPERPATH_FEED_TIMEOUT 91
 PAPERPATH_PAPERJAM 91
6.5. Print Quality Issues 92
 Color Mixing (CM) 92
 Streaking (SR) 102
 Dot Misplacement (DP) 108
 Banding (BD) 111
 Other General Print Quality Errors (GE) 117
 Paper Handling (PA) 126
 Inkdelivery System (ID) 131
 Paper Cutting 133
 Firmware Error Message (ER) 134
 Maintenance Module (MM) 136
7. Printer Specifications 137

Printing Innovation iCUBE 1 Specifications

General

Brand	Printing Innovation
Model	iCUBE 1
Category	Label Maker
Language	English