In order to avoid personal injury, always use appropriate personal protection when
performing maintenance tasks
• Clothing protection
• Powder-free nitrile gloves
• Lint-free cloth wipes – It is critical that the wipes used be soft to avoid scratching the
prtinhead, and lint-free to avoid contaminating the printhead.
• De-ionized (DI)/Distilled water (electronics grade) – Use only deionized or distilled
water for cleaning the unit. Take care to avoid contaminating the printhead with
cleaners, lubricants, or other chemicals.
WARNING! – Always power down the printengine before investigating any cable
connections! The printer runs off a 24-volt DC supply. Although this is considered low
voltage, the current is sufficient enough to cause injuries.
To Next Page
Loading...
Need help?
General