Printronix M4L - Wireless LAN and Serial Settings



39
Wireless LAN
Item Description Default
Operating Mode
This item is used to set the operating mode of wireless local area networks
to connect devices to the networks.
Infrastructure
Note: Infrastructure mode requires the use of an access point for this
communication to take place. Ad hoc mode involves connecting a computer
directly to another computer.
Scan AP This item is used to scan the access point devise N/A
DHCP
This item is used to ON (enable) or OFF (disable) the DHCP (Dynamic Host
Configuration Protocol) network protocol.
ON
Bluetooth
Main Menu Manual Setup Bluetooth
Local Name
PIN Code
Print Setup
Item Description Default
Local Name This item is used to set the local name for Bluetooth.
BT-SPP
PIN Code This item is used to set the local PIN code for Bluetooth.
0
Date Time
Item Description Default
Date This item is used to set the date. (ex: 2013-05-30)
N/A
Time This item is used to set the time. (ex: 19:20:02)
N/A