OPERATION
Page 40 of 99 USER MANUAL PSPC UM-PSPC-06-E/10-2012
Stop:
By touching the stop button, you will stop the system. The system stops after finishing certain internal
controlling cycles. Thus it may take some time before the system is completely stopped. This is the
normal procedure to stop the system.
Clear:
This button is used to remove all eggs out of the system.
Normally all gates need to be filled with eggs before these eggs are transported towards the tray.
When no more eggs are entering the system on the infeed conveyor, the system waits for eggs and
the eggs on the roller track and cup conveyor remain on the system.
When the clear button is switched to 1, the eggs in the system are transported towards the vacuum
head even though no eggs are detected at the gates. The vacuum head remains filling trays until all
eggs are removed from the packer.
TIP!
The last trays leaving the system may be only partially filled!
To Next Page
Loading...
