Prinzen PSPC30 - Denester to Paper Tray; Denester to Plastic Tray; Denester to Twin Pack Tray

OPERATION
UM-PSPC-06-E/10-2012 USER MANAUL PSPC Page 49 of 99
For several types of trays, Prinzen has tray
denester conversion kits. Among others the
following kits are available:
1. Paper trays
2. Plastic trays
3. Twin pack (Jordano) trays
4. Hartmann egg tech unic trays
DENESTER TO PAPER TRAY
The paper trays denester has on both sides of
the denester:
- 2 top grippers with 2 pins.
- 2 plastic lower grippers with 6 pins.
For conversion, place the lower grippers onto
the denester block.
DENESTER TO PLASTIC TRAY
The plastic trays denester has on both sides of
the denester:
- 2 top grippers with 2 pins.
- 1 lower gripper with 2 inside grippers
attached to it.
For conversion, place the lower gripper (with
the 2 inside grippers attached to it) onto the
denester block.
DENESTER TO TWIN PACK
TRAY
The only difference between the plastic tray
parts and the twin pack tray parts are the top
grippers. The top grippers for the twin pack
tray have 1 pin instead of 2. In case that your
gripper has 2 pins, you can remove the outside
pin on both grippers.
1
2
3
3
4