OPERATION
UM-PSPC-06-E/10-2012 USER MANAUL PSPC Page 45 of 99
STOPPING PRODUCTION
Follow below steps to stop the system:
1. First wait until no more eggs are supplied
on the egg-collecting conveyor.
2. Set the clear selection switch to 1.
3. Wait until all eggs are placed into the
trays. No more eggs should be present
inside the system.
TIP!
The last trays leaving the system may be only
partially filled.
4. Push the stop button.
5. Wait until all movements of the system are
stopped.
6. Switch the system OFF.
7. Remove all trays from the system.
To Next Page
Loading...
