OPERATION
Page 58 of 99 USER MANUAL PSPC UM-PSPC-06-E/10-2012
EGG COUNTER MENU
From the egg counter menu, 3 sub menu’s are available: Show counters menu, select counters menu
and reset counter menu.
Show counters menu:
Eight egg counters are included. C1 to C6 are batch counters. For example: Use a batch counter for
each henhouse. Total counter 1 shows the sum of counters C1 to C6. Total counter 2 shows the total
amount of eggs packed by the system during its lifetime and cannot be reset.
The counter that states “active” is the counter currently in use to count the eggs.
Select counters menu:
To select a new “active” counter enter the select counters menu. Press F6 to change the current
selected counter. Press F4 to increase the counter number. Press F6 to acknowledge.
The selected counter is the counter used to count the eggs and is visible on the display while the
system is running production.
Reset counters:
Using this menu resets all counters (except for total counter 2). Press F5 to reset all the counters.
To Next Page
Loading...
