MAINTENANCE
Page 78 of 99 USER MANUAL PSPC UM-PSPC-06-E/10-2012
Monthly Maintenance: Interval (hours):
Apply silicon spray to the 30-cell tray denester block
up/down guide (4x)
Apply silicon spray to the30-cell tray denester lower
grippers in/out guides (4x)
Apply silicon spray on the 30-cell tray denester upper
grippers plain bearings (8x).
Apply silicon spray to the hatch tray denester block
up/down guide (4x).
Apply silicon spray on the hatch tray denester upper
grippers plain bearings (8x)
Apply silicon spray to the stamping unit plain bearings
(2x)
Apply silicon spray on the egg pattern device plain
bearings (4x)
Apply silicon spray on the egg pattern device blocking
shafts.
Check chain tension of the transfer lever