PRO AIR TPK 21 - Setting of Desired Alarm Value

11.2. Setting of desired Alarm Value 2
99
All of the values Source/Pre-Alarm/Main Alarm and Delay) have now been set for Alarm 1.
NOTE: For each relevant menu item you can press to call up the help text in
your selected language.
!
1. If the „Alarm 2“ setting field is not already highlighted, select the field and
confirm with .
To set all of the parameters for alarm value 2, proceed in the same way as described in
„Setting of desired Alarm Value 1“.
Description, how to set all values, you will find on page 86 onwards.
1
2
Main
Out
Alarm 1
Alarm 2