PRO AIR TPK 21 - Setting of Desired Alarm Value; Setting of Desired Measurement - Channel (Source)

11.1. Setting of desired Alarm Value 1
11.1.1 Setting of desired measurement - channel (source)
85
Below you see the screen of the setting menu:
4. If the „Alarm 1“ field is not already highlighted, select the field and
confirm with .
Under the Menü item „Alarm 1“ you will find all the settings for the alarm system.
The following screen of the settings menu will appear:
6. If the „Source“ field is not already highlighted, select the field and
confirm with .
4
5
6
7
Main
Out
Alarm 1
Alarm 2
Source
Pre Alarm
Main Alarm
On Delay