PRO AIR TPK 21 - Configuration of Lower Analog Output Value

10.3. Configuration of lower analog output value
82
The analogue output signal is freely configurable. Both the lower and the upper output value
can be freely determined.
The menu item „Setpoint 4 mA/0V" allows you to enter the lower value for the analog output
signal. The desired value must lie within the setting range selected in section 10.2.
If the „Setpoint 4mA/0V“ field is not already highlighted, select the field and
confirm with .
The following screen will appear:
Select the desired value and confirm with „Enter“
X
0,00
1
2
3
4
5
6
-
7
8
9
0
.
X
Source
Current / Voltage
Setpoint 4mA/0V
Setpoint 20mA/10V