PRO AIR TPK 21 - Reset Fault Memory

8.12 Reset of Fault Memory
55
The device has an internal fault memory that makes it easier for you and for us as
manufacturers to comprehend any malfunctioning of the device after the event has occurred.
This fault memory runs in the background and is stored on the SD card.
This menu item allows the fault memory of the device to be reset. This frees memory on the
SD card.
The procedure is as follows:
1. Select one of the three segment fields (the background turns dark and control keys appear
at the bottom of the display).
2. Select „Settings“
The following display appears:
PIN
- - - - - -
1
2
3
4
5
6
7
8
9
0
X
3. Enter your personal PIN code (if it has already been changed). If the device is
still in its factory settings, key in 111111.
1
2
3
Class
ISO 8573-1
1.17
bar
Dew-/Frostpoint
- 7.0
o
C
4
Pressure