PRO AIR TPK 21 - Page 43

38
The following display of the settings menu appears (Level 3):
8. Please scroll down with „Scroll-down“ key until you see the following screen.
9. If the „Factory Setting“ field is not already highlighted, select the field and
confirm with .
The „Back“ key takes you back to the previous level until you are back at the home screen.
Select „Yes“ if you want to return the device to
its factory settings (NOTE: all saved data will
be lost) and confirm by pressing „Enter“ .
!
8
9
Password
Language
Info
Heater
Factory Settings
Outputs
Touchscreen Calibration
Manual Value Override
Ye s
No