PRO AIR TPK 21 - Page 47

42
Two choices appear („Output“ and „State“)
10. If the „Output“ field is not already highlighted, select the field and
confirm with .
11. A list will appear of all the test possibilities.
12. Scroll up or down using the "Scroll-down" and "Scroll-up" keys until you find the
output value that you wish to test.
None
Relay 1
Relay 2
Relay 3
Relay 4
Pre Alarm
Main Alarm
Analog Out
10
11
Output
State
None
Relay 1
Relay 2
Relay 3