PRO AIR TPK 21 - Page 94

89
To determine the desired alarm value for the „Upper Limit“ for the pre-alarm
press „Limit Value“ and confirm with „Enter“ .
This brings you to the following setting menu:
Select the desired value and confirm with „Enter“ .
If you so wish, you may now enter a "Hysteresis" value for the upper limit value. To do this,
select "Hysteresis" and confirm with „Enter" .
In the screen that follows, enter the desired value and confirm your input with "Enter" .
12
13
X
0,00
1
2
3
4
5
6
-
7
8
9
0
.
X
X
0,00
1
2
3
4
5
6
-
7
8
9
0
.
X
Used
Limit Value
Hysteresis
Used
Limit Value
Hysteresis