Proceq PROFOSCOPE - Regional Setting; Rebar Diameter

© 2015 Proceq SA 25
6.2 Regional Setting
The Profoscope supports four regional settings. This setting affects all other displays and
should be done prior to making other selections.
Metric
Cover and bar diameters in mm accor d ing to table in 6.3
ASTM inch
Cover in inch, bar diameters according to table in 6.3
ASTM mm
Cover in mm, bar diameters
according to table in 6.3
Japanese
Cover in mm, bar diameters according to table in 6.3
6.3 Rebar Diameter
Based on the regional setting, the bar diameter menu supports following bar dimensions.
Metric ASTM Japanese
Bar size Diam.
(mm)
Bar size Diam.
(inch)
Diam.
(mm)
Bar size Diam.
(mm)
5 5 #2 0.250 6 6 6
6 6 #3 0.375 10 9 9
7 7 #4 0.500 13 10 10
8 8 #5 0.625 16 13 13
9 9 #6 0.750 19 16 16
10 10 #7 0.875 22 19 19
11 11 #8 1.000 25 22 22
12 12 #9 1.125 29 25 25
14 14 #10 1.250 32 29 29
16 16 #11 1.375 35 32 32
18 18 #12 1.500 38 35 35
20 20 #13 1.625 41 38 38
22 22 #14 1.750 44 41 41
25 25 #15 1.875 48 44 44
28 28 #16 2.000 51 48 48
32 32 #18 2.250 57 51 51
36 36 57 57
40 40
44 44
50 50
Tab. 2 Rebar diameters