Procopi ESS PRO User Manual

84 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1/84

2015/02 - Indice de révision : B - Code : 29650

ELECTROLYSEUR ESS ET ESS PRO

CHLORINATOR

NOTICE D’INSTALLATION ET CONSEILS D’UTILISATION

(à lire attentivement et à conserver pour utilisation ultérieure)

p.1

GB

DE

FR

p.29

S.57

Table of Contents

Questions and Answers:

D
ddiazJul 26, 2025
What to do if free chlorine is low in Procopi ESS PRO Swimming Pool Cleaners?
- C
  charlesdoyleJul 26, 2025
  To address a low free Chlorine concentration in your Procopi Swimming Pool Cleaners, begin by inspecting the electrodes for scale buildup and descale if needed. If scaling isn't the problem, check that the Redox set point is correct, and modify it if necessary. If the set point is correct, verify that this value corresponds to the desired Chlorine concentration by creating a water sample and testing it using a photometer.
D
deanna08Aug 8, 2025
Why is chlorine level low in Procopi Swimming Pool Cleaners?
- S
  Stefanie RyanAug 8, 2025
  If you observe that the concentration of free Chlorine in the Procopi Swimming Pool Cleaners is too low, it could be due to the device not working correctly or remaining off when it should be running. Check the control panel for any error messages and refer to the corresponding list for troubleshooting steps.

Procopi ESS PRO Specifications

General

Brand	Procopi
Model	ESS PRO
Category	Swimming Pool Cleaners
Language	English

Summary

SAFETY RECOMMENDATIONS

USER SAFETY GUIDELINES

Guidelines for safe installation and placement of the control panel and general user safety.

MATERIAL AND PREMISES SAFETY

Precautions for protecting electrical components and preventing hazards like vapor accumulation or freezing.

INSTALLATION GUIDE

PROBE AND PANEL PLACEMENT

ELECTRICAL CONNECTIONS AND WIRING

Connecting components to the panel and detailing the internal wiring of the control panel.

PARAMETER SETTINGS AND FUNCTIONS

SETTING PH AND REDOX SET POINTS (EES PRO)

CELL DESCALING AND PH REDUCTION

WARNING AND ERROR MESSAGES

SALT CONCENTRATION ALERTS

Interpreting warnings for low or high salt levels and troubleshooting.

CELL ELECTRICAL FAULTS

Troubleshooting steps for cell power supply short circuits and related error messages.

SYSTEM OPERATION WARNINGS

PUMP AND ALARM MESSAGES

PROBE AND CIRCUIT BOARD FAULTS

MAINTENANCE PROCEDURES

PH AND REDOX PROBE MAINTENANCE

PROBE CALIBRATION GUIDE

Step-by-step instructions for calibrating the pH and Redox probes for accurate measurements.

PERISTALTIC PUMP TUBE REPLACEMENT

CELL DESCALING AND WINTERIZING

TROUBLESHOOTING APPENDIX

Related product manuals

Preview: Procopi ESS