34/84
2015/02 - Indice de révision : B - Code : 29650
Flow detector and
temperature sensor
1
diameter 63 mm. The temperature probe is
detector. Both are connected to a terminal in
the control panel.
X X
pH-clear pump 1
The pH-clear pump is used to inject acid into the
hydraulic circuit. It is glued to a length of tube,
diameter 63 mm, and comes with a transparent
shield to protect against splashing. It should be
mounted on the white barrel union of the cell,
and on another barrel union (not provided) at the
other end so that it may be dismounted.
The pH-Clear pump comes with:
• A spare injection tip
• 3 spare assemblies (black
compression tubing + blue suction
tips)
• 1 shiny black suction tube
OPTION X
Sensor mounting
Tee
1
Tee, diameter 63 mm, with two 63/50 reduction
X
pH probe 1 X
1 X
63-50 reduction
*
tees, 2 for the cell barrel unions, or for the
assembly (cell + pH clear)
4* 6*
Ballasted acid
suction strainer
1
To be mounted on the end of the suction
tube delivered with the pH-clear pump
OPTION X
Buffer solutions
pH = 4 et pH = 7
to calibrate the pH
probe
X
To Next Page
Loading...
Need help?
General
