Promise Technology SMARTSTOR NS4300N Product Manual

Chapter 2: Installation and Setup
15
Connecting to PASM
The Promise Advanced Storage Manager (PASM) software is factory-installed on
the SmartStor system. PASM runs in the browser on your PC. You can access
PASM:
• Directly in your browser. See page 16.
• From SmartNAVI. See page 17.
Browser Support
Choose one of the following browsers to use with PASM:
Finding the SmartStor’s IP Address
To access the SmartStor in your browser, you must know the SmartStor’s IP
address. Use SmartNAVI for this purpose.
1. Right-click the SmartNAVI icon in the Windows
application tray (lower right corner of the screen).
2. Choose Open SmartNAVI from the popup menu.
The SmartNAVI MSN window appears with the NAS
List displayed. The IP address of the SmartStor shown in the NAS List.
For more information about SmartNAVI, see “Chapter 5: SmartNAVI” on
page 51.
• Internet Explorer
• Mozilla
•Firefox
• Netscape Navigator
• Safari (Mac OS X)
SmartNAVI icon
IP address of the SmartStor
detected on the network

Promise Technology SMARTSTOR NS4300N Specifications

General

Brand	Promise Technology
Model	SMARTSTOR NS4300N
Category	Storage
Language	English