Promise Technology SMARTSTOR NS4300N Product Manual

Chapter 5: SmartNAVI
61
Managing RAID Volumes
This category includes the following topics:
• Creating a RAID Volume (page 61)
• Expanding a RAID Volume (page 61)
• Viewing RAID Volume Status (page 62)
• Viewing a List of RAID Volumes (page 62)
• Recreating a RAID Volume (page 63)
Creating a RAID Volume
To create a RAID volume:
1. Go to the Main Window.
2. Click the Volume Configuration icon.
3. Click the Create Volume button.
4. Choose Automatic or Manual RAID Volume creation.
If you chose Manual, choose the type of RAID Volume you want:
• Maximum Capacity – RAID 0, using all disk drives
• Data Protection – RAID 5, using all disk drives
5. Click the OK button.
The RAID volume takes several minutes to create and initialize, depending
on the size of your disk drives.
Expanding a RAID Volume
This feature adds disk drives to your existing RAID volume.
To expand a RAID volume:
1. Go to the Main Window.
2. Click the Volume Configuration icon.
3. Click the Expand Volume button.
4. Click the OK button.
5. Click the Yes button in the confirmation box.
Note
When you create your RAID volume in PASM, you can choose
additional options, such as Multiple RAID volumes.
See “Setting up SmartStor with the Setup Wizard” on page 89.

Promise Technology SMARTSTOR NS4300N Specifications

General

Brand	Promise Technology
Model	SMARTSTOR NS4300N
Category	Storage
Language	English