Protec OPTIMAX 2010 NDT - 9 Power Supply; Electrical Connections; System Protection; Power Consumption

OPTIMAX
2010 NDT
User Manual
516
0
-
0
-
0002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
52
von
58
9 Power Supply
9.1 Electrical connections
Electrical specifications are indicated on model nameplate.
Type
116
x
-
1
-
x000
230 V ~ +/
-
10%, 8,8A, 50Hz
Typ
e
116
x
-
2
-
x000
Type 116x-9-x000
230 V ~ +/
-
10%, 8,8A, 60Hz
230 V ~ +/-10%, 7,1A, 60Hz for 110V Operation
Machine tested for overvoltage category II according to IEC 1010 (EN 61010, VDE 0411).
9.2 System protection
IP 20
9.3 Power consumption
Stand-by 0.12kWh
Processing 2.0kWh
WARNING!
To lower the risk of an electrical shock, the device can only be run on a power
supply with a protective conductor.