Protec OPTIMAX 2010 NDT - 10 Technical Specifications

OPTIMAX
2010 NDT
User Manual
516
0
-
0
-
0002
PROTEC GmbH & Co. KG, In den Dorfwiesen 14, 71720 Oberstenfeld, Germany
53
von
58
10 Technical specifications
Film transport
Continuous roller transport system
Film
format
s
In general
:
sheet film
s u
p to
max. 35
.
8cm(14
.
1 ’’)
width;
Smallest film format 10x10 cm (4x4 ’’).
Processing capacity
78
films
24x30 cm
,
crosswise,
(10x12 “)
shortest
processing time.
Processing time
2
.5
–
10
min.; adjustable in steps of 0.1
-
min.
Linear speed
8.4
–
35.0
cm/min., depending on selected cycle
time
Developer time
41
-
164
sec, depending on selected cycle time
Tank capacities
:
Developer, Fix
er
and water tank,
5
litres each
(1.3gal)
Circulation system
Developer and fixer are
continuously
circulated
by a circulation pump
Replenishment
Automatic by film surface measurement in
relation to processed film; replenishment can be
switched off; time replenishment can be
activated
Developer temperature
Adjustable 2
6
-
37 °C (
78
-
99
°F)
Fixer
temperature
Adjustable 26
-
37 °C (78
-
99 °F)
Dryer temperature
Adjustable between 10´00% of dryer output,
temperature achieved depends on line voltage
Water connection
Permissible water pressure 2
-
10 bar (29
-
145
psi),
permissible water temperature 5 - 30 °C (41 - 86
°F)
Water consumption
1.9 litres per minute (0.5 gal/min) when
processing. Water saving mode: 0.9l/min
Drain capacity
7 litres per minute (1.85 gal/min)
Noise level
Less than 58 dB(A)
Heat emission
Processing: 1.4 kJ/s
Pollution
degree
2
Weight (processor)
Empty 35 kg (77 lbs)
Filled 50 kg (110 lbs)
Dimensions (LxWxH)
77x59x42 (*
112) cm
30.3x23.2x16.5 (* 44.1)’’
Floor space required
0.45 m
2
(4.8 sqft)
* Height incl. optional working table resp. base cabinet.