Pulsar ACCOLADE 2 LRF User Manual

Quick Menu Functions
The quick menu allows change of basic settings such as display brightness and contrast,
smooth digital zoom.
Enter the menu with a short press of the ?enu (3) button.
To toggle between the functions below, press successively the Menu (3) button.
Brightness – press briefly the UP (2)/ DOWN (5) buttons to change display brightness
from 0 to 20.
Contrast – press briefly the UP (2)/ DOWN (5) buttons to change display contrast from 0
to 20.
Base mode
Image not found or type unknown
– it allows you to select one of the three observation
modes (Forest, Rocks, Identification) as a base for the User mode.
Smooth digital zoom – press the UP (2)/ DOWN (5) buttons to change digital zoom from
2.5 to 20.
Smooth digital zoom is in 0.1x increments.
To exit quick menu, press and hold down the Menu (3) button or wait 5 sec for automatic
exit.

Pulsar ACCOLADE 2 LRF Specifications

General

Objective Lens Diameter	50 mm
Detection Range	1800 m
Sensor Resolution	640x480 pixels
Display Type	AMOLED
Pixel Pitch	17 µm
Frame Rate	50 Hz
Laser Rangefinder Range	1000 m
Protection level	IPX7
Dimensions	164x130x64 mm
Waterproof	Yes
Fogproof	Yes
Weight	0.7 kg
Display Resolution	640x480 pixels
Operating Temperature	-25 … +50 °C
Battery Type	Li-Ion Battery Pack