Pulsar ACCOLADE 2 LRF User Manual

Firmware Update
Stream Vision
https://www.youtube.com/embed/0BIu4rr-8IY
1.
Download free of charge Stream Vision App on Google Play or App Store.
2.
Connect your Pulsar device to your mobile device (smartphone or tablet).
3.
Launch Stream Vision and go to section “My Devices”.
4.
Select your Pulsar device and press “Check Updates”.
5.
Wait for the update to download and install. Pulsar device will reboot and will be ready to
operate.
Important:
if your Pulsar device is connected to phone, please turn on mobile data transfer
(GPRS/3G/4G) to download update;
if your Pulsar device is not connected to your phone but it's already in the “My Devices”
section, you may use Wi-Fi to download update.
Find answers to frequently asked questions about using Stream Vision here.
Stream Vision 2
1.
Download free Stream Vision 2 App in Google Play or App Store.
2.
Connect your Pulsar device to your mobile device (smartphone or tablet).
3.
Launch Stream Vision 2 and go to section “Settings”.
4.
Select your Pulsar device and press “Check firmware update”.
5.
Wait for the update to download and install. Pulsar device will reboot and will be ready to
operate.
Important:
if your Pulsar device is connected to phone, please turn on mobile data transfer
(GPRS/3G/4G) to download update;
if your Pulsar device is not connected to your phone but is already listed in “Settings” >
“My devices” section, you may use Wi-Fi to download update.
Is your firmware up to date?
Click hereto check the latest firmware for your device.

Pulsar ACCOLADE 2 LRF Specifications

General

Objective Lens Diameter	50 mm
Detection Range	1800 m
Sensor Resolution	640x480 pixels
Display Type	AMOLED
Pixel Pitch	17 µm
Frame Rate	50 Hz
Laser Rangefinder Range	1000 m
Protection level	IPX7
Dimensions	164x130x64 mm
Waterproof	Yes
Fogproof	Yes
Weight	0.7 kg
Display Resolution	640x480 pixels
Operating Temperature	-25 … +50 °C
Battery Type	Li-Ion Battery Pack