Pulsar ACCOLADE 2 LRF - General Device Settings

General Settings
1.
Press and hold down the ?enu (3) button to enter the main menu.
2.
Select option General Settings with the UP (2)/ DOWN (5) buttons.
3.
Press briefly the ?enu (3) button to confirm.
The following settings are available:
Language
Selecting interface language
1.
Select option Language with the UP (2)/ DOWN (5) buttons.
2.
Press briefly the?enu (3) button to confirm.
3.
Select one of the available interface languages with a short press of the UP (2)/ DOWN
(5) buttons: English, French, German, Spanish, Russian.
4.
Press briefly the?enu (3) button to confirm.
Date
Date setup
1.
Select option Date with UP (2)/ DOWN (5)buttons..
2.
Press briefly the ?enu (3) button to confirm. Date format is displayed as: YYYY/MM/DD
(year/month/day)
3.
Select the correct values for the year, month and date with a short press of the UP (2)/
DOWN (5) buttons.
4.
Switch between digits with a short press of the ?enu (3) button.
5.
Save selected date and exit the submenu with a long press of the ?enu (3) button.
Time
Time setup
1.
Select option Time with UP (2)/ DOWN (5) buttons.
2.
Press briefly the ?enu (3) button to confirm.
3.
Select the desired time format with a short press of the UP (2)/ DOWN (5) buttons: 24 or
PM/AM.
4.
Switch to hour setup with a brief press of the ?enu (3) button.
5.
Select hour value with a brief press of theUP (2)/ DOWN (5) buttons.
6.
Switch to minute setup with a brief press of the ?enu (3) button.
7.
Select minute value with a brief press of the UP (2)/ DOWN (5) buttons.
8.
Save selected time and exit the submenu with a long press of the ?enu (3) button.