Units of Measure
Selection of units of measurement
1.
Select optionUnits of Measure with UP (2)/DOWN (5) buttons.
2.
Press briefly the ?enu (3) button to confirm.
3.
Select the desired unit of measurement - meters or yards - with UP (2)/DOWN (5)
buttons.
4.
Press briefly the ?enu (3) button to confirm.
5.
Exit to general settings submenu takes place automatically.
Default Settings
Restore default settings
1.
Select option Default Settings with UP (2)/DOWN (5) buttons.
2.
Press briefly the ?enu (3) button to confirm.
3.
With a short press of the UP (2)/DOWN (5) buttons select "Yes" to restore default
settings or "No" to abort.
4.
Confirm selection with a brief press of the ?enu (3) button.
If "Yes" is selected, display will show "Do you want to restore default settings?"
and "Yes" and "No" options. Select "Yes" to restore default settings.
If "No" is selected, action is aborted and you return to the submenu.
The following settings will be restored to their original values before changes made by the
user:
Video recorder mode – video
Observation mode – forest
Calibration mode – automatic
Language – English
Wi-Fi – off (default password)
Magnification – off (no digital zoom)
PiP – off
Color mode – White Hot
Unit of measurement – metric
Warning: date and time settings, default pixel map and remote control activation are not
restored.
Format
This item allows you to format the Flash-card (memory card) of the device (this will delete all
files from the memory card).
1.
Select option Format with UP (2)/DOWN (5) buttons.
2.
Press briefly the ?enu (3) button to confirm.
3.
With a short press of the UP (2)/DOWN (5) buttons select "Yes" to format the memory
To Next Page
Loading...
Need help?
General
