BLACK BOX LEVEL 130 UL (SECOND EDITION)
June 2017
Part Number M-130-0-002-0U
COPYRIGHT
© Pulsar Process Measurement Limited, 2003 -17. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any
form without the written permission of Pulsar Process Measurement Limited.
WARRANTY AND LIABILITY
Pulsar Process Measurement Limited guarantee for a period of 2 years from the date of delivery that it will
either exchange or repair any part of this product returned to Pulsar Process Measurement Limited if it is
found to be defective in material or workmanship, subject to the defect not being due to unfair wear and
tear, misuse, modification or alteration, accident, misapplication or negligence.
DISCLAIMER
Pulsar Process Measurement Limited gives nor implies any process guarantee for this product, and shall
have no liability in respect of any loss, injury or damage whatsoever arising out of the application or use of
any product or circuit described herein.
Every effort has been made to ensure accuracy of this documentation, but Pulsar Process Measurement
Limited cannot be held liable for any errors.
Pulsar Process Measurement Limited operates a policy of constant development and improvement and
reserves the right to amend technical details as necessary.
The blackbox shown on the cover of this manual is used for illustrative purposes only and may not be
representative of the actual blackbox supplied.
TECHNICAL ENQUIRIES
Please contact Pulsar Process Measurement for technical support.
COMMENTS AND SUGGESTIONS
If you have any comments or suggestions about this product, then please contact:
To Next Page
Loading...
