Pulsar blackbox 130 - Remote Alarm; P985 Tel. No.1; P986 Tel. No2; P987 Tel. No3

Page 51
P988 Call Type
This parameter determines what type of connection is made via the modem.
Option
Description
0= Off (Default)
Remote alarm function is disabled
1 = Ring
This option initiates a connection to a remote
modem/computer which will then allow
remote communication with the unit. Please
consult Pulsar or your local distributor for
further details.
2= SMS
This option initiates a predetermined
message which is sent to the remote
telephone number detailing date and time the
alarm was initiated, the site ID, alarm
condition and level at the time the alarm was
initiated.
SMS Time
The following parameters determine when and how often a SMS message is
to be sent.
P995 SMS Interval
This parameter determines how often a SMS message will be sent. If the time
interval is set at ‘0.00 mins.’ then a SMS message will only be sent when an
alarm condition occurs, when the time interval is set to anything other than
zero then a SMS message will be sent at the relevant interval detailing the
current level and/or any alarm condition present at that time.
Entered in minutes. Min = 0.000, Max = 1440mins. Default = 0.00 mins.
P996 Start Time
Sets the time at which the SMS Interval is to Start.
Entered as time. Min = 00:00, Max = 23:59 Default = 00:00
P997 Stop Time
Sets the time at which the SMS Interval is to Stop.
Entered as time. Min = 00:00, Max = 23:59 Default = 23:59