Pulsar blackbox 130 - Common Parameters; P218, P228 - Relay Fail Safe

Page 59
Common Parameters
P217, P227 - Relay Closures
The blackbox will record how many times each relay is operated, this
parameter displays the number of times the relay has activated since the relay
has been in use. It can be reset with any value.
P218, P228 - Relay Fail Safe
Your blackbox has a general fail-safe parameter P808. However, this can be
overridden so that each individual relay has its own independent fail safe
mode.
This parameter determines what the relay will do in the event of the Failsafe
Time (P809) expiring.
Option
Description
0 = Default
Relay assumes system default mode P808
1 = Hold
Relay remains in its current state
2 = De-Energise
Relay will De-Energise
3 = Energise
Relay will Energise