Page 21
P078 Use Temp
This parameter determines if Temperature compensation is used or not.
Options: 0 = No
1 = Yes
P079 Use Gate
This parameter determines if the Gate is used. If set to 0 = No, then there will be
no agitator control, P47 Outside Count and P48 Echo Lock will be disabled, the
unit will process valid echoes which appear above the Loss Limit and in
accordance with the setting of P67 (choose Peak).
Options: 0 = No
1 = Yes
P080 Lost Lock
This parameter switches on P64 & P65 near band and near jump. Which are not
yet enabled.
Options: 0 = No
1 = Yes
To Next Page
Loading...
Need help?
General
