Pulsar ULTRA 5 Service Manual

Page 41
Remote Communicator
P063 Kiss Required (From Software Revision 6.9.2)
Note* This parameter is direct access only (see page 1).
This parameter determines whether or not an IR remote communicator needs to be
shown to the front of the unit before it can be used. Replaces P089 Kiss Enable.
Options:
0 = No
1 = Yes
P089 Kiss Enable (From Software Revision 6.4.1 to 6.9.1)
The kiss enabled parameter allows the unit to be accessed via a remote infra-red
communicator.
Options:
0 = No
1 = Yes
Default = 1
Default = 1

Pulsar ULTRA 5 Specifications

General

Brand	Pulsar
Model	ULTRA 5
Category	Controller
Language	English