PULSAR ULTRA SERIES
SERVICE PARAMETERS (FIFTH EDITION REV 1)
June 2016
COPYRIGHT
© Pulsar Process Measurement Limited, 2000 – 16. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form without
the written permission of Pulsar Process Measurement Limited.
WARRANTY AND LIABILITY
Pulsar Process Measurement Limited guarantee for a period of 2 years from the date of delivery that it will either
exchange or repair any part of the product returned to Pulsar Process Measurement Limited if it is found to be
defective in material or workmanship, subject to the defect not being due to unfair wear and tear, misuse,
modification or alteration, accident misapplication or negligence.
DISCLAIMER
Pulsar Process Measurement Limited gives nor implies any process guarantee for the product, and shall have no
liability in respect of any loss, injury or damage whatsoever arising out of the application or use of any product or
circuit described herein.
Every effort has been made to ensure accuracy of this documentation, but Pulsar Process Measurement Limited
cannot be held liable for any errors.
TECHNICAL ENQUIRIES
Please contact Pulsar Process Measurement Limited for technical support.
COMMENTS AND SUGGESTIONS
If you have any comments or suggestions about this product, then please contact:
To Next Page
Loading...
Need help?
General
