Pulsar Zenith 140 User Manual

ZENITH 140 INSTRUCTION MANUAL
134
Operation
P831 mA Mode
This parameter determines how the mA Output relates to what is measured.
By default, it operates the same as the display (P100), but it can be set to
operate as follows:
OPTION
DESCRIPTION
0 = Default
mA output relative to Mode P100
1 = Distance
mA output relative to Distance.
2 = Level
mA output relative to Level.
3 = Space
mA output is relative to Space.
4 = Average Level
mA output is relative to the average level of two
points of measurement P100 = 4
5 = Differential
mA output is relative to the differential between two
points o measurement. P100 = 5
Setpoint
By default, the mA Output will represent the empty (0 or 4mA dependant
on (P830) mA Range) and 100% of the operational span (20mA), but you
may wish to have the output represent a section of the operational span. For
example, the application has an operational span of 6 metres, but output is
to represent empty (0 or 4mA dependant on (P830) mA Range) to a level
of 5 metres (20mA). If so P834 (Low Level) should be set to 0.00 metres and
P835 (High Level) should be set to 5 metres.
P834 mA Low Level
This parameter sets the level, distance, or space, depending on the selected
mA Out Mode (P831) at which the low mA output will occur (0 or 4mA
dependant on (P830) mA Range). Default = 0.000m
P835 mA High Level
This parameter sets the level, distance or space, depending on the selected
mA Out Mode (P831) at which the high mA output will occur (20mA).
Default = 6.00m

Pulsar Zenith 140 Specifications

General

Brand	Pulsar
Model	Zenith 140
Category	Power Supply
Language	English