ZENITH 140 INSTRUCTION MANUAL
70
Relay Parameters
All relay related parameters are prefixed with a 2**.
The second digit of the three-figure parameter number denotes the relay
number as follows:
21* parameters for Relay 1
22* parameters for Relay 2
23* parameters for Relay 3
24* parameters for Relay 4
25* parameters for Relay 5
26* parameters for Relay 6
The third digit selects specific parameter for the setting of the relays, which
can be selected individually and results in the following parameter numbers
for each relay:
Relay 1 210 to 219
Relay 2 220 to 229
Relay 3 230 to 239
Relay 4 240 to 249
Relay 5 250 to 259
Relay 6 260 to 269
To Next Page
Loading...