Pulsar Zenith 140 - DST Start Month

ZENITH 140 INSTRUCTION MANUAL
150
P975 Start Month
This parameter is used to select the month, in which Daylight-Saving Time
will start.
OPTION
DESCRIPTION
1= January
DST will start during the month of January
2= February
DST will start during the month of February
3=March (Default)
DST will start during the month of March
4= April
DST will start during the month of April
5= May
DST will start during the month of May
6= June
DST will start during the month of June
7= July
DST will start during the month of July
8= August
DST will start during the month of August
9= September
DST will start during the month of September
10= October
DST will start during the month of October
11= November
DST will start during the month of November
12= December
DST will start during the month of December
P976 DST End Time
This parameter is used to set the time of day at which Daylight-Saving
Time will end, the time is entered in the format HH: MM (24-hour format).
Default = 02:00.