ZENITH 140 INSTRUCTION MANUAL
38
Choose Your Application
There are four categories of application, which are all described at the end of
this chapter. They are level, pump down (sump control), pump up
(reservoir control) or customised, all with the choice of alarms and a number
of pumps, dependant on application.
If you want to set-up a basic level monitoring application, as described in
the following example 1, then choose 1. You then need to decide the
number of alarms required and their function and choose the appropriate
options.
If you want to set-up a pump down (sump control) application, as described
in the following example 2, then choose 2. You then need to decide the
number of pumps required the pump duty and any requirement for
alarms and choose the appropriate options.
If you want to set-up a pump up (reservoir control) application, then choose
3. You then need to decide the number of pumps required the pump duty,
and any requirement for alarms, and choose the appropriate options.
In certain cases, the Quick Setup Menu has been customised for customer
specific applications, to choose one of these options press 4 and select the
appropriate customised application and enter the details required as
prompted.
Once you have chosen your application you will be asked a series of
questions which are answered by choosing the appropriate option as
detailed in the flow charts that follow. Once all the questions have been
answered you will be prompted to provide further information, as detailed in
the tables that follow, to complete the programming of the unit.
To Next Page
Loading...
Need help?
General