Pulsar Zenith 140 User Manual

ZENITH 140 INSTRUCTION MANUAL
86
P211, 221, 231, 241, 251, 261 =2 (Storm)
Relay Setpoint 1 is entered in values of Measurement Units (P104)
See the appropriate relay function tables (P211, 221, 231, 241, 251, 261)
for further information.
P211, 221, 231, 241, 251, 261 =3 (Aeration)
Relay Setpoint 1 is entered in Minutes to set Cycle Time
See the appropriate relay Function tables (P211, 221, 231, 241, 251, 261)
for further information.
P211, 221, 231, 241, 251, 261 =4 (Flush Valve)
Relay Setpoint 1 is entered in Pump cycles to set Flush Interval.
See the appropriate relay Function tables (P211, 221, 231, 241, 251, 261)
for further information.
P211, 221, 231, 241, 251, 261 =5 (Step Time)
Relay Setpoint 1 is entered in values of Measurement Units (P104)
See the appropriate relay function tables (P211, 221, 231, 241, 251, 261)
for further information.
P211, 221, 231, 241, 251, 261 =6 (Differential)
Relay Setpoint 1 is entered in values of Measurement Units (P104)
See the appropriate relay function tables (P211, 221, 231, 241, 251, 261)
for further information.
P214, P224, P234, P244, P254 Relay Setpoint 2
P211, 221, 231, 241, 251, 261 =1 (Time)
This parameter determines the “Cycle Time” for the operation of the relay.
See the appropriate relay Function tables (P211, 221, 231, 241, 251, 261)
for further information.
P211, 221, 231, 241, 251, 261 =2 (Storm)
Relay Setpoints are entered in values of Measurement Units (P104)
See the appropriate relay Function tables (P211, 221, 231, 241, 251, 261)
for further information.

Pulsar Zenith 140 Specifications

General

Brand	Pulsar
Model	Zenith 140
Category	Power Supply
Language	English