BMC CONFIGURATION GROUP
4-31
1. Choose the Host Configuration either Automatic or Manual.
2. Enter the Host Name in the given field if you have chosen Manual Configuration.
3. Under Register BMC,
Check the option Register BMC to register with this DNS settings.
4. In the Domain name Configuration Settings,
Select the domain settings from the dropdown list.
Enter the Domain Name in the given field.
5. In the Domain Name Server Configuration,
Select the DNS Server Settings, from the dropdown list.
In the IP Priority, IPV4 or IPV6 as a top priority.
In the DNS Server1/DNS Server2/DNS Server3 field,
If the DNS Server Settings is setting to Manual mode, user needs to fill those fields
with DNS IP address manually according to IPv4 or IPv6 format. Otherwise, if it is in
non-Manual mode, DNS server IP address is assigned by DHCP server.
6. Click Save to save the entries.
7. Click Reset to reset the entries.
LDAP/E-Directory
The Lightweight Directory Access Protocol (LDAP) is an application protocol for query-
ing and modifying data of directory services implemented in Internet Protocol (IP) net-
works.
In MegaRAC GUI, LDAP is an Internet protocol that MegaRACR card can use to authenti-
cate users. If you have an LDAP server configured on your network, you can use it as an
easy way to add, manage and authenticate MegaRACR card users. This is done by passing
login requests to your LDAP Server. This means that there is no need to define an addi-
tional authentication mechanism, when using the MegaRAC card. Since your existing
LDAP Server keeps an authentication centralized, you will always know who is accessing
the network resources and can easily define the user or group?]based policies to control
access.
If you choose Automatic, you need not enter the Host Name and if you choose Manual, you
need to enter the Host Name.
To Next Page
Loading...
Need help?
General
