QCT QuantaGrid Series User Manual

BIOS CLEAR CMOS
3-16
 Memory reference code.
 Microcode updates.
 ME Firmware.
BIOS Setting Utility
Use AMISCE to import/export BIOS setting in Linux:
1. Export BIOS setting and generate script file:
/o /s NVRAM.txt
2. Import BIOS setting with script file:
/i /s NVRAM.txt
BIOS Revision
The BIOS revision is used to identify the BIOS image and BIOS phase.
Clear CMOS
The following steps will load the BIOS defaults by jumper:
1. Power down the system.
2. Move CMOS clear jumper from pins 1-2 to pins 2-3 for a few seconds.
3. Move CMOS clear jumper back to pins 1-2.
4. System automatically powers on.
5. Check BIOS defaults are loaded.
Clear Password
1. Power down the system.
2. Move password clear jumper from pins 1-2 to pins 2-3.
3. Power on the system.
4. Make sure password is cleared.
5. Power down the system.
6. Move password clear jumper from pins 2-3 back to pins 1-2.
7. Power on the system.
8. Set new password.
9.

QCT QuantaGrid Series Specifications

General

Brand	QCT
Model	QuantaGrid Series
Category	Network Storage Server
Language	English