QCT QuantaGrid Series - Smtp

BMC CONFIGURATION GROUP
4-48
Procedure:
1. In KVM encryption, check or uncheck the option Enable.
2. In Media Encryption, check or uncheck the option Enable.
3. In Virtual media Attach mode, select Auto Attach or Attach from the dropdown
list as required.
4. Click Save to save the entries.
5. Click Reset to reset the entries
‘.
SMTP
Simple Mail Transfer Protocol (SMTP) is an Internet standard for electronic mail (e-mail)
transmission across Internet Protocol (IP) networks.
Using MegaRAC GUI, you can configure the SMTP settings of the device.
Virtual Media Attach Mode
Two types of VM attach mode are available:
 Attach: Immediately attaches Virtual Media to the server upon
bootup.
 Auto Attach: Attaches Virtual Media to the server only when a virtual
media session is started.
Save
To save the current changes.
Note:
It will automatically close the existing remote redirection either KVM or
Virtual media sessions, if any.
Reset To reset the modified changes.
Note:
 If we choose more than one virtual CDROMs, then the RHEL5 host displays only one
CDROM in the “Computer” window. When we redirect second CDROM, the second
CDROM device will appear in “Computer” window.
 If we choose more than 2 virtual Hard disks, then the RHEL5 host displays only two hard
disks in “Computer” window. When we redirect third hard disk, the third hard disk will
appear in “Computer” window
Table 21: Remote Session Settings Page (Continued)
ITEM DESCRIPTION