BMC SNMP
4-60
2. Enable the Local Media Support if needed.
3. Click Save to save the changes made else click Reset to reset the previously saved
values.
SNMP
This page is used to set the configuration for SNMP. User could set the SNMP community
string and trap in this page. It just display when the project support SNMP.
General support as below:
The following fields are displayed in this page.
UTC Timezone
Maximum of two devices can be added in Floppy, CD/DVD and Hard disk drives.
If there are two device panels for each device, and when you click the Connect button, then
the redirected device panel will be disabled.
Table 29: SNMP Settings
ITEM DESCRIPTION
Enable SNMPv1/v2 The selection enable or disable the SNMP feature for query.
Read-Only Community String Display or set the read-only community string.
Read-Write Community String Display or set the read-write community string.
The feature “UTC Timezone” used for port setting supported from Grantley platform.
To Next Page
Loading...
Need help?
General
