BMC CONFIGURATION GROUP
4-59
18. To delete an existing user, select the user from the list and click Delete User.
Virtual Media
In MegaRAC GUI, this page to configure Virtual Media device settings. If you change the
configuration of the virtual media in this page, it shows the appropriate device in the
JViewer Vmedia dialog. For example, if you select two floppy devices in Configure Virtual
Media page, then in JViewer > Vmedia, you can view two floppy device panel.
To open Virtual Media page, click Configuration > Virtual Media from the main menu. A
sample screenshot of User Management Page is shown in the screenshot below.
Figure 4-43. Configure Virtual Media Devices
The following fields are displayed in this page.
Procedure:
1. Select the number of Floppy devices, CD/DVD devices and Hard disk devices from
the dropdown list.
There is a list of reserved users which cannot be added / modified as BMC users. Please Refer
“MEGARAC SP-X Platform Porting Guide” section “Changing the Configurations in PMC File->
User Configurations in PMC File” for the list of reserved users.
Table 28: Configure Virtual Media Devices
ITEM DESCRIPTION
Floppy devices
The number of floppy devices that support for Virtual Media redirec-
tion.
CD/DVD devices
The number of CD/DVD devices that support for Virtual Media redirec-
tion.
Hard disk devices
The number of hard disk devices that support for Virtual Media redirec-
tion.
Local Media Support
To enable or disable the local media support for Virtual Media redirec-
tion.
Save To save the configured settings.
Reset To reset the previously-saved values.
To Next Page
Loading...
Need help?
General
