BMC CONFIGURATION GROUP
4-47
Procedure:
1. Enable the RADIUS Authentication checkbox to authenticate the RADIUS.
2. Enter the port number in the Port Number field.
3. Enter the time out value in seconds in the Time out field.
4. Enter the address of the server in the Server Address field.
5. Enter the authentication secret for RADIUS Server in the Secret field.
6. Click Save to save the entered details.
7. Click Reset to reset the entered details.
Remote Session
In MegaRAC SP, use this page to configure virtual media configuration settings for the
next redirection session. Encryption is disabled by default.
To open Remote Session page, click Configuration > Remote Session from the main
menu. A sample screenshot of Remote Session Page is shown in the screenshot below.
Figure 4-34. Remote Session
The fields of Remote Session Settings Page are explained below.
Save To save the settings.
Reset To reset the modified changes.
Table 21: Remote Session Settings Page
ITEM DESCRIPTION
KVM Encryption Enable/Disable encryption on KVM data for the next redirection session.
Media Encryption
Enable/Disable encryption on Media data for the next redirection ses-
sion.
Table 20: RADIUS Settings Page (Continued)
ITEM DESCRIPTION
To Next Page
Loading...
Need help?
General
