BMC MAINTENANCE GROUP
4-70
Server Power Control
This page allows you to view and control the power of your server.
To open Power Control and Status page, click Remote Control > Server Power Control
from the main menu. A sample screenshot of Power Control and Status page is shown in
the screenshot below.
Figure 4-49. Power Control and Status Page
The various options of Power Control are given below.
Procedure:
Select an action and click Perform Action to proceed with the selected action.
Maintenance Group
This group of pages allows you to do maintenance tasks on the device. The menu contains
the following items:
BMC Firmware Update
BIOS Update
Table 38: Server Power Control
ITEM DESCRIPTION
Reset Server This option will reboot the system without powering off (warm boot).
Power off Server – Immediate This option will immediately power off the server.
Power off Server – Orderly Shut-
down
This option will initiate operating system shutdown prior to the shut-
down.
Power On Server This option will power on the server.
Power Cycle Server This option will first power off, and then reboot the system (cold boot).
Perform Action Click this option to perform the selected operation.
You will be asked to confirm your choice. Upon confirmation, the command will be executed
and you will be informed of the status.
To Next Page
Loading...
Need help?
General
