BMC REMOTE CONTROL
4-69
Procedure:
1. Click Video Record > Settings to open the settings page as shown in the screen-
shot below.
Figure 4-48. Video Record Settings Page
2. Enter the Video Length in seconds.
3. Browse and enter the location where you want the video to be saved.
4. Enable the option Normalized video resolution to 1024X768.
5. Click OK to save the entries and return to the Console Redirection screen.
6. Click Cancel if you don’t wish to save the entries.
7. In the Console Redirection window, click Video Record > Start Record.
8. Record the process.
9. To stop the recording, click Video Record > Stop Record.
Active Users
Click this option to displays the active users and their system IP address.
Help
Jviewer: Displays the copyright and version information
Quick Buttons
The lower right of Console Redirection windows displays all the quick buttons. These
quick buttons helps you to perform these functions by just clicking them.
Before you start recording, you have to enter the settings.
This option is available only when you launch the Java Console.
To Next Page
Loading...
Need help?
General
