BMC CONFIGURATION GROUP
4-39
this ratio of pre?]configured entries to run?]time configurable entries can be reallocated if
necessary.
Figure 4-25. PEF Management – Event Filter
The fields of PEF Management – Event Filter Tab are explained below.
This page contains the list of configured PEF’s.
Procedure:
1. Click the Event Filter Tab to configure the event filters in the available slots.
Table 17: PET Management - Event Filter
ITEM DESCRIPTION
PEF ID This field displays the ID for the newly configured PEF entry (read-only).
Filter configuration Check box to enable the PEF settings.
Event Filter Action Check box to enable PEF Alert action. This is a mandatory field.
Sensor Name To choose the particular sensor from the sensor list.
Modify To modify the existing entries.
Delete To delete Event filter list.
To Next Page
Loading...