Qlogic SANbox 5800V Series

10 – RADIUS Server Configuration
Displaying RADIUS Server Information
10-2 59263-02 A
S
Displaying RADIUS Server Information
Enter the Show Setup Radius command to display RADIUS server information as
shown in the following example. Refer to Table 14-26 for a description of the
RADIUS configuration parameters.
SANbox #> show setup radius
Radius Information
------------------
DeviceAuthOrder Local
UserAuthOrder Local
TotalServers 2
Server: 1
ServerIPAddress 10.0.0.13
ServerUDPPort 1812
DeviceAuthServer False
UserAuthServer False
AccountingServer False
Timeout 2
Retries 0
SignPackets False
Secret ********
Server: 2
ServerIPAddress bacd:1234:bacd:1234:bacd:1234:bacd:1234
ServerUDPPort 1812
DeviceAuthServer True
UserAuthServer True
AccountingServer True
Timeout 2
Retries 0
SignPackets False
Secret ********