6 – Port Configuration
Displaying Port Information
6-2 59263-02 A
S
Port Configuration Parameters
Enter the Show Config Port command to display the port configuration
parameters. These parameters determine the operational characteristics of the
port. Refer to Table 14-19 for a description of these parameters.
SANbox #> show config port 0
Configuration Name: default
-----------------------------
Port Number: 0
------------
AdminState Offline
LinkSpeed Auto
PortType GL
SymbolicName Port0
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnabled True
AutoPerfTuning False
LCFEnabled False
MFSEnabled True
VIEnabled False
MSEnabled True
NoClose False
IOStreamGuard Disabled
PDISCPingEnable True
To Next Page
Loading...
